ThermaPureHeat™ Process Mold Remediation with Heat

The ThermaPureHeat™ process is a patented new technology that utilizes clean, dry, odorless heat to create an environment that is lethal to the targeted organism. We deploy this process for the disinfection of structures, enclosable areas, and objects, such as mail or household items.

While much of our work is involved in treating entire structures for the more common hazards such as termites, toxic mold, and other microorganisms, the same scientifically proven principles we use are effective on bacterial and viral contamination such as Hantavirus, Anthrax and Smallpox.

Companies utilizing ThermaPureHeat™ have completed more than twenty thousand (20,000) indoor contamination projects, including numerous Federal, State and local government sites. In addition, microbiological decontamination has been deployed for the National Park Service and the Department of Defense.

Your Health Is Our First Concern.

The ThermaPureHeat™ technology is an effective tool to use in improving the air you breathe.

First, to protect your building from cross contamination, a plastic containment barrier is erected to confine the mold spores. Mold spores can become airborne when disturbed during cleaning. A vacuum is created using HEPA filtered negative air machines to eliminate outbound leaks in the containment and capture any airborne spores.

The accessible mold contamination is then physically removed. Damaged and weakened building materials are removed while other surfaces are thoroughly cleaned. While working our technicians wear personal protection equipment. Cleaning up toxic mold contamination is something you should not try on your own.

Then clean, dry heat, generated by EPA registered equipment, is directed into the containment through flexible Mylar ducting and the inside air is slowly raised to a safe “sauna-like temperature”, but one that is lethal to mold, bacteria, viruses and odors. To ensure that the temperature is maintained at levels which are lethal to the target organisms, state-of-the-art digital thermometers monitor inside ambient and surface temperatures. This heating process kills the inaccessible mold, bacteria and viruses for a higher level of cleanliness.

The heating process also helps dry out your building making it less conducive to mold and bacterial growth. ThermaPureHeat™ may also reduce annoying and irritating odors. Once the desired temperature level has been maintained for the specified time, the cool-down begins.

Since no toxic chemicals are used, our technicians can enter and monitor the treated area, and there are no harmful residues to contaminate the air or surfaces.

After remediation, your consultant should again test to be sure that the inside air is as clean, or cleaner, than the outside air. Only then can we remove the protective containment barriers and your remediation process is finished.

The Experts Agree… Disinfect Buildings with Heat.

“Heat is an effective, non-toxic form of biological control in structures, and substantially improves indoor air quality where it has been compromised.”

Michael D. Geyer, PE, CIH, CSP


“Recently, the development of heat technology for thermal pest eradication has demonstrated a new potential for control of mold dissemination through control of insect vectors… Heat treatment will also kill fungal spores and vegetative structures and can substantially aid the rapid drying of building materials.”

Sean P. Abbott, PhD 


“Since the days of Louis Pasteur, it’s been well-known that ‘heat kills’. Millions of lives have been saved through the technique of heating milk and other foods, destroying or otherwise inactivating bacteria. The application of this principle to our environment is a natural progression of that knowledge.”

Dr. Richard Ashby, Ventura County Medical Director